QNAP NAS
QNAP versions supported by QLauncher
Qnap (ARM or X86)
Updated Firmware
Docker
Docker Version 19.03.6
Install QLauncher
QPKG Download
1. Enter NAS home →【Control Panel】
2. Check your hardware Spec info, whether it is 【ARM】 or【 X86】 (This is going to determine your install package)
3. Choose by your device hardware Spec to download
QLauncher_X86 → QLauncher 0.2.4_x86
QLauncher_ARM → QLauncher 0.2.4_ARM
Install Container station
1. Go to 【App center】→ Find【Container station】
2. Install 【Container station】→ Start
3. Go to【App Center】 click Install Manually
4. Choose【Browse】
5.Choose by hardware spec to upload QPKG file
6. Install Manually
7. Check Docker status in Container station
After completion, go to 【Container Station】 to check Docker status
You should find 6 non-duplicate Docker start with these title
Start QLauncher
【App Center】→ QLauncher → Open
Monitor QLauncher via QQQ App
1. Download QQQ App and register your account
Download QQQ App on App Store
Download QQQ App on Google Play
2. After open QLauncher you will get your QRcode for device binding
3. Scan the QRcode via QQQ app
Last updated